Memory Management RAM ROM PROM EPROM EEPROM Magnetic Disk

Rajeev Reddy Nareddula 6/09/2018

Source (Internet): IACE Material.

Memory management:

Memory is part of the computer where programs and data are stored electronically. The data and programs are stored at two different levels:

MAIN (INTERNAL) MEMORY:

The different kinds of main memory are:

     1. RAM(Random Access Memory)

     2. ROM(Read Only Memory)

RANDOM ACCESS MEMORY:

The RAM of the computer is divided into many locations, which are uniquely numbered or addressed. Information and data are stored in these memory locations and are retrieved randomly from these locations. RAM contains data that needs to be processed and the instructions, which are used for processing. It is a read and write memory. It is a volatile and temporary memory.

Two types of RAM:

     1. Static RAM is called static because it will continue to hold information without refreshment i.e it does not required refreshment

     2. Dynamic RAM is called dynamic because it require refreshment It loose information with time.

READ ONLY MEMORY:

RAM is also called as volatile memory, as the contents of RAM are erased when the computer is switched off. The size of a computer is measured in terms of the number of storage locations in memory . It contains the information necessary to startup you computer and the basic instructions that operate it. The storage elements in the ROM contain certain pre-coded instructions, which are not available to the users. These storage locations are only read and cannot be erased or changed. So, it is also known as non-volatile memory. Certain ROM chips are available that can be erased.

PROM:

It stands for Programmable read Only Memory. These ROMs become permanent if they are programmed. Once the chip is programmed, the information recorded cannot be changed.

EPROM:

It stands for Erasable Programmable Read Only Memory. By using a special process of exposing to ultraviolet light, the original information can be erased. Using a special programmer facility, the chip can be programmed to record new different information.

EEPROM:

It stands for Electrically Erasable Programmable Read Only Memory. This memory can be programmed and erased by electrical signals.

AUXILIARY MEMORY:

As RAM has the limited storage capacity and is also not permanent, external storage devices supplement computer systems. They accept data or program instructions from the processor: retain them and can be accessed as needed to compute a processing task. They are called disk drive. Data stored in a disk can be directly accessed. Every disk has a directory of what is stored in the disk. The directory contains the name given to the data file and its storage location (address). Whenever the processor needs data, the read/write head of the disk drive identifies the disk address of data file. It moves to the specified track and then to the proper sector where the data is file. It moves to the specified track and then to the proper sector where the data is stored. The different types of storage devices are

MAGNETIC TAPE:

It is a medium for magnetic recording, made of a thin magnetizable coating on a long, narrow strip of plastic film. It was developed in Germany, based on magnetic wire recording. Devices that record and play back audio and video using magnetic tape are tape recorders and video tape recorders. A device that stores computer data on magnetic tape is a tape drive (tape unit, streamer).

MAGNETIC DISK:

Hard Disk:

Hard Disk is the main computer storage device, which is fast, reliable and stores a lot of information. A non-removable device is used to store information in the computer so that it can be accessed later. It consists of several platters mounted on a spindle that are made to rotate in a very high speed. When multiple disks are packed together, a number of read and write heads are used to write or retrieve data. Hard disk is the fixed disk, which cannot be removed from the disk drive.

Floppy Disk:

Floppy disk is a thin sheet of magnetized plastic inside a protective covering where the data is stored. Floppy disks come in two sizes: 5 inch and 3 inch squares. The floppy disk is made to rotate and read /write head is in contact with the spinning disk. Data is written as dry magnetic spots on the disk surface. While writing new data, one disk erases data previously stored at the novation, but otherwise magnetic spots remains indefinitely reading by the magnified spots passing index read/write head. Floppy drive is an electronic device that can read and write information onto these disks. Floppy drives are part of the computer and they also come in two sizes depending on which size of disk they can read. Floppy disks are used mainly for software distributing, transporting files and creating backups.

OPTICAL DISK:

On an optical disk data is seconded by burning a permanent pattern into the surface of the disk by means of a high precision laser rays. The optical disk is the type of CD-ROM on which you can both read for, and write Once/Read Many. You can write only once onto a WORM optical disk. It cannot be erased or over-written. After writing the information on it, you can only read it for as many times as you like.

FLASH MEMORY:

Flash memory is non-volatile memory that is an integrated circuit that does not need continuous power to retain the data. It is much more expensive than magnetic storage. However, flash memory is widely used with car radios, cell phones, digital cameras, PDAs, MP3 players, and printers.

Result(s):

• types of memory management
• memory management techniques
• memory management in operating system
• memory management in operating system notes
• memory management
• functions of memory management
• memory management in computer architecture